Konig Jortel

1. Press and hold the WPS/REST button for 10 seconds at the back of the camera. It will reset and restart the uCare Cam. After about 60 seconds, the LED color should ash Green and Red.

2. Press “WPS” button on WiFi Router.

. Press the WPS/REST Button on the back of the uCare Cam for 2 seconds. If uCare Cam has entered the WPS connection mode, the status LED color will turn a fast blinking Green.

4. uCare Cam will try for up to 2 minutes to connect to the WiFi Router using WPS.

5. If the LED color changes to Orange, your uCare Cam has successfully connected to your Router. If the LED does not change to Orange, the setup has failed. Please make sure the uCare Cam is within WiFi distance of your Router, press the WPS/REST button for 10 seconds to reset uCare Cam, and try the setup again.

6. Use Smartphone APP to add uCare Cam into Camera list. See instruction manual – “Android – Add uCare Cam (already connected to Router) to APP”.

D. iOS – Setup uCare Cam WiFiMethod

1: Use WPS (WiFi Protected Setup)Available if your WiFi Router supports WPS and it is set to use WPA or WPA

2 security encryption. WEP security encryption is not supported in WPS mode. An easy way to check if your Router supports WPS is to look for a button that says “WPS” on the Router. It may also be called “AOSS” or “QSS”.

1. Press and hold the WPS/REST button for 10 seconds at the back of the camera. It will reset and restart the uCare Cam. After about 60 seconds, the LED color should ash Green and Red.

2. Press “WPS” button on WiFi Router

3. Press the WPS/REST Button on the back of the uCare Cam for 2 seconds. If uCare Cam has entered the WPS connection mode, the status LED color will turn a fast blinking Green

4. uCare Cam will try for up to 2 minutes to connect to the WiFi Router using WPS.

5. If the LED color changes to Orange, your uCare Cam has successfully connected to your Router. If the LED does not change to Orange, the setup has failed. Please make sure the uCare Cam is within WiFi distance of your Router, press the WPS/REST button for 10seconds to reset uCare Cam, and try the setup again.

6. Use Smartphone APP to add uCare Cam into Camera list. See instruction manual – “iOS-Add uCare Cam (already connected to Router) to APP”

Translate »
%d bloggers liken dit: